AUDIO TUBES | GERMAN TUBE HIFI | MY EQUIPMENT | CONTACT | ON EBAY

Siemens - Klangfilm

Introduction / Overview

Klangfilm History

Moving Coil MC preamps

KLV Eurodyn Rack Amps

KLV Preamps

Output Transformers
Speakers
Siemens 2000 Amps

6SELA Preamps

6SELA Power Amps

6SELA Tuners

Spare Parts

Typical Tubes

Racks

Miscellanous

Projects

Eugen Bauer

 
Klangfilm KLV 00X  as RIAA phono preamps
               
   

This page will be updated soon.

V009 as RIAA phono preamp
Though the V-009 is called "record player preamp" it will not work properly as RIAA preamp without carrying out
the following mods:
- remove C7 (HF correction)
- remove C3 (HF correction)
- wire R6 to ground (as grid resistor)
- jump R2, directly connect C2 to the input grid (higher gain)
- bypass R15=100kOhms with 330pF capacitor (RIAA correction)
That'S all. Anyway I prefer the

V007 as RIAA preamp...
This amp has more gain and uses the cool EF804s AND has an outstanding input transformers which is perfect for
MC cartridges. This amp is also easily convertible to a RIAA preamp:
- remove R3 (leads to 5dB more bass - if you want a subsonic filter do not remove it...)
- bridge R18/C14 (get about 10dB more gain and linearize frequency response)
- use a 22k resistor instead of the gain pot
- solder a 1nF cap to the grid of the EF40 tube
- solder a 100k resistor parallelled with a 270pF cap from the connection of 2 and C9 to the 1nF cap
And here we are.

Variations:

You can keep

 
 
 

 

 
               

BACK

TOP OF THIS PAGE

HOME